Why is my Bush Radio showing 'No service'?
The 'No service' message on your Bush Radio indicates either that there is no DAB+ coverage in your area or that you are experiencing poor signal reception. Try adjusting the position of the aerial to improve reception.
What to do if there is no sound from my Bush CUBE Radio?
If there is no sound coming from your Bush Radio, the volume control might be turned down. Adjust the volume control to increase the sound level.
Why is there static sound on my Bush Radio?
Static sound on your Bush Radio usually means the signal reception is too low. Try adjusting the aerial or move the unit to a location with a stronger signal.
What to do if my Bush CUBE sound is distorted?
If the sound from your Bush Radio is distorted, the volume might be too high. Try adjusting the volume control to a lower level.
What to do if I can't find the desired station on my Bush Radio?
If you are unable to find the desired station on your Bush Radio, it may be due to a weak signal. Try using the manual tune function to find the station.
General advice on positioning, usage, ventilation, and avoiding hazards for the unit.
Instructions for cleaning the unit safely using a soft, dust-free cloth.
Guidance on user-serviceable parts and consulting qualified personnel for repairs.
Explains how DAB+ overcomes multipath distortion for better signal reception.
Describes how DAB+ frequency covers large areas, simplifying station tuning.
Details how broadcasters transmit text information like DJ names and song titles.
Provides information on checking local DAB+ coverage via a website.
Instructions for connecting the power adapter to the unit and wall outlet.
Guidance on extending the aerial for optimal radio reception.
Steps for powering the radio on and off using the POWER button.
How to increase or decrease the volume level using VOL+/- buttons.
Instructions for connecting headphones to the 3.5mm socket.
Guidance on inserting 4xAA batteries matching the correct polarities.
Steps to select DAB+ mode and tune into stations using scan buttons.
Procedure to save favorite DAB+ stations using the PRESET and ENTER buttons.
How to select and play a previously stored DAB+ station preset.
Steps to switch to FM mode and tune into stations.
How to automatically scan for FM stations using buttons.
How to manually scan for FM stations using buttons.
Procedure to save favorite FM stations using the PRESET and ENTER buttons.
How to select and play a previously stored FM station preset.
How to cycle through display modes for DAB+ and FM radio information.
Common problems and their solutions for the radio unit.
Details on power consumption, voltage, frequency ranges, and output.
To Next Page
General
