What to do if my Bush Radio has no sound?
If your Bush Radio has no sound, check these possible causes: 1. Headphones might be connected. Disconnect them. 2. The volume might be set too low. Adjust the volume. 3. The power cord might not be properly connected. Ensure it is correctly connected.
Why does my Bush Radio have poor reception?
If your Bush Radio has poor reception, try the following: * Rotate the aerial to find the best reception and make sure the aerial is fully extended. * Move the unit away from other electrical equipment like TVs, video recorders, computers, thermostats, and fluorescent lamps, as these can cause interference. * Check if you are in a digital radio area by using the online postcode tracker at www.digitalradioplus.com.au.
How to fix Bush Radio buttons that are not working?
If the buttons on your Bush Radio aren't working, the issue might be due to electrostatic discharge. To resolve this, turn off the unit, disconnect it from the mains plug, and then reconnect it after a few seconds.
Your safety and the safety of others are important. Please read the 'Safety Instructions' before operating.
Contact the provided phone number to discuss product failures with service engineers.
Position cables safely, avoid humid/damp conditions, prevent children inserting objects, ensure proper ventilation.
Disconnect from mains before cleaning. Use a soft, dust-free cloth; avoid liquids or aerosol cleaners.
No user-serviceable parts. Refer to qualified professionals or your retailer for service.
Details on POWER, SELECT, INFO, SCAN, MODE, MENU, PRESET buttons and LCD display for radio functions.
Instructions for removing the battery door, inserting batteries, and notes on battery care.
Explains how DAB+ uses reflected signals to improve reception compared to analogue systems.
DAB+ uses a single frequency for an area, scanning and tuning stations automatically.
Broadcasters can transmit text like DJ names, song titles, or other information to the radio.
Check local coverage at www.digitalradioplus.com.au or via SMS.
Lists the items included in the package: DAB+ Radio, Power Adapter, and User Guide.
Advice on placing the radio on a stable surface and avoiding specific locations like direct sunlight or damp areas.
The aerial should be extended for best reception in both DAB+ and FM modes.
Requires headphones with a 3.5mm stereo plug. The jack is located on the back of the unit.
Connect power adapter, then press POWER button to turn the unit on or off.
Automatic station search and storage. Recommended to perform periodically for new broadcasts.
How to change between stations using arrow buttons or the SELECT dial for quicker scrolling.
Adjust the radio volume by turning the SELECT dial, not within the menu.
Press INFO button repeatedly to view various station details like scrolling text, signal strength, etc.
Refer to 'View Station Information' to activate 'Signal Strength' display.
Instructions to manually tune to specific channels and frequencies using MENU and SELECT.
Adjusts compression levels to balance sound differences between stations (Off, Low, High).
Removes inactive stations from the station list by selecting 'Yes' in the Prune menu.
Store up to 10 DAB+ and 10 FM stations by holding the PRESET button and using the SELECT dial.
Recall stored stations by pressing the PRESET button and selecting the desired preset number.
Configure FM scan to stop at any station or only strong signal stations via the MENU.
Press INFO button repeatedly to view station details like Radio Text, Program Type, Audio Info, Time, and Date.
Options to set 12/24 hour format, auto-update from DAB+, manually set time/date, and date format.
Set a sleep timer (15-90 minutes) for the radio to automatically enter standby mode.
Adjust LCD display brightness for Power On and Standby modes (low, Medium, High).
Resets all user settings, stored time, and station settings to default values.
Process to set alarms, including state, time, duration, source, frequency, and volume.
How to activate the snooze function when an alarm sounds, causing it to repeat after 5 minutes.
Instructions to temporarily turn off an alarm with the POWER button or permanently via settings.
View the radio's software information by navigating through the MENU and System settings.
Check headphones connection, volume level, and power cord connection.
Addresses issues like electrostatic discharge by suggesting a power cycle.
Solutions include rotating aerial, moving away from interference, and checking DAB+ coverage.
Lists specifications like speaker power, frequency range, display type, power supply, and dimensions.
12-month warranty for defects, excluding damage from misuse, neglect, or unauthorized alterations.
Contact Bush Warranty at 1800 509 394 (Australia) or 0800 450 259 (New Zealand) for issues.
Details conditions like validity within country, correct operation, domestic use, and exclusion of accidental damage.
To Next Page
General
