EasyManua.ls Logo

Bush CUBE - Playing FM Radio; FM Auto Tuning; FM Manual Tuning; Storing a Station Preset (FM)

Bush CUBE
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating instructions
Playing your FM radio
To switch form DAB+ to FM, press the MODE button to select the FM mode.
9
Manual tune
1.Press the <and> buttons to manually scan through available frequency.
2.The frequency will increase or decrease by 0.05MHz for each time you press
<and> buttons.
Storing a station preset
You can save up to 10 FM station presets for quick access.
1.Press and hold the PRESET button to select the station you wish to preset.
2.Using the <and> buttons choose the preset number(1-10) you wish to use,
then press the ENTER button to store the station.
Recalling a station preset
1.Press the PRESET button and use the <and> buttons to select your desired
preset station.
2.Press the ENTER button to play the station.
Your DAB Radio has a variety of display modes providing information about the
station you are listening to.
1.DAB+ mode
Repeatedly press the MENU button to cycle between the following display
modes: Audio type(stereo), Signal Strength, Time/Date, DLS, Programme Type,
factory Ensemble,Channel Frequency
2.FM mode
Repeatedly press the MENU button to cycle between the following display modes:
Radio Text, Signal Strength, Time/Date, Channel Frequency, Auto
Display Mode
Auto tune
1.Press and hold the <and> buttons 2 seconds to automatically scan through
available frequency.
2.The frequency will increase or decrease by 0.05MHz for each time you press
<and> buttons.

Related product manuals