A
Ashley CraneAug 12, 2025
Why is my Bush CDVD100W1SWM Portable DVD Player remote not working?
- DDerek JohnsonAug 12, 2025
If the Bush Portable DVD Player remote isn't responding, first, ensure the batteries are correctly inserted, matching the polarities. If that's not the issue, the batteries might be low, so try replacing them. Also, check for any obstructions between the remote and the unit and remove them. Make sure you are not too far away (the remote range is approximately 6m) and aim the remote at the IR sensor on the front of the unit near the LED indicators.