Command Function
Alexa, resume ‘FN’ Resumes media playback
Alexa, stop ‘FN’ Stops media playback
Alexa, fast forward
on ‘FN’
Advances media in fast forward
mode
Alexa, rewind on
‘FN’
Rewinds media
Alexa, set the
volume of ‘FN’ to
50
Sets the volume to the specified
level
Alexa, turn the
volume up on ‘FN’
Increases volume by 10 units
Alexa, turn the
volume down on
‘FN’
Decreases volume by 10 units
Alexa, mute ‘FN’ Mutes sound
Alexa, unmute ‘FN’ Unmutes sound
Alexa, change the
input to “input_
name” on ‘FN’
The TV switches to the input
source with the specified name
(e.g. HDMI 1)
Alexa, change
channel to
"channel_number"
on ‘FN’
The TV switches to the channel
with the specified number (e.g.
channel 200)
Alexa, change
channel to
“channel_name"
on ‘FN’
The TV switches to the channel
with the specified name
Alexa, channel up
on ‘FN’
The TV switches to the next
higher channel, if any available
Alexa, channel
down on ‘FN’
The TV switches to the next
lower channel, if any available
Alexa, next
channel on ‘FN’
The TV switches to the next
channel on the channel list
FN is the abbreviation for ‘Friendly Name’.
Amazon DART
Once the setup is complete, the DART (Dash Replenishment
Through Alexa) feature will be integrated. This feature
enables new batteries to be ordered automatically when
the remote control is low on batteries. You can use Alexa
App to configure DART settings, e.g. the battery type you
want to be ordered.
Advanced features
Getting the most from your TV
Advanced features
42
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
