If the ALLM option is enabled, picture mode can not
be changed as long as ALLM signal is received from the
current HDMI source.
In order for the ALLM feature to be functional the related
HDMI source setting should be set to Enhanced. You can
change this setting from the Sources>Source Settings
menu or from the Settings>System>Sources menu.
E-Manual
You can find instructions for your TV’s features in the
E-Manual.
To access the E-Manual, enter Settings menu, select
Manuals and press OK. For quick access press Home
button and then Info button.
By using the directional buttons select a desired topic
and press OK to read instructions. To close the E-Manual
screen press the Exit or Home button.
Note: Depending on model, your TV may not support
this function. The content of the E-Manual may vary
according to the model.
To Program Your SKY Remote For Your
TV
1. Make sure your SKY box is connected to your TV
2. Turn your TV and SKY box on
3. Press TV on your SKY remote control handset
4. Hold down SELECT and the RED button together
for about two seconds, until the red light on the SKY
remote blinks twice.
5. Key in 0808 on your SKY remote. The light on the SKY
remote should blink twice
6. Press the STANDBY button on your SKY remote
control. Your TV should now switch o.
7. Press SELECT again. The light on your SKY remote
control should now blink twice
You should now be able to control some basic functions
on your TV from your SKY remote control (e.g. volume
up/down, programme up/down).
*If this number does not work, please go to SKY website
to find the alternative number to operate the TV.
Configuring Parental Settings
The Parental menu options can be used to prohibit users
from viewing of certain programmes, channels and usage
of menus. These settings are located in the Settings>
System>Parental menu.
To display parental lock menu options, a PIN should be
entered. After coding the correct PIN, parental setting
options will be displayed.
Menu Lock: This setting enables or disables access to all
menus or installation menus of the TV.
Guidance: This setting enables or disables access to some
of the MHEG applications. Disabled applications can be
released by entering the right PIN.
Maturity Lock: If this option is set, the TV gets the maturity
information from the broadcast and if this maturity level
is disabled, prohibits access to the broadcast.
Note: If the country option in the First Time Installation
is set as France, Italy or Austria, Maturity Lock’s value will
be set to 18 as default.
Child Lock: If this option is set to On, the TV can only be
controlled by the remote control. In this case the control
button on the TV will not work.
Internet Lock: If this option is set to ON, the internet
using applications will be disabled. Set to OFF to release
these applications again.
Set PIN: Defines a new PIN number.
Default CICAM PIN: This option will appear as greyed
out if no CI module is inserted into the CI slot of the TV.
You can change the default PIN of the CI CAM using this
option.
Note: Default PIN could have been set to 0000 or 1234. If
you have defined the PIN (is requested depending on the
country selection) during the First Time Installation use
the PIN that you have defined.
Some options may not be available depending on the
model and/or on the country selection in the First Time
Installation.
Some apps will have their own Parental settings.
Electronic Programme Guide
By means of the electronic programme guide function
of your TV, you can browse the event schedule of the
currently installed channels on your channel list. It
depends on the related broadcast whether this feature
is supported or not.
To access the programme guide, press the Guide button
on your remote. You can also use the Guide option under
TV menu.
There are 2 dierent types of schedule layouts available,
Timeline Schedule and Now/Next. To switch between
these layouts highlight the tab with the name of the
alternative layout on the upper side of the screen and
press OK.
Advanced features
Getting the most from your TV
Advanced features
26
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
