Initial Setup Wizard
Note: Follow the on-screen instructions to complete
the initial setup process. Use the directional buttons and
the Select button on the remote to select, set, confirm
and proceed.
1. Choose Your Language
The language selection options will be listed on the
screen. Select the desired language from the list and press
Select to continue.
2. Select TV Mode
In the following step of the initial setup, you can set the
TV’s operation mode. Store Use option will configure
your TV’s settings for store environment. This option is
intended only for store use. It is recommended to select
Continue for home use.
3. Pair Your Remote with your TV
If your remote does pair with your TV automatically
or if you have paired your remote with your TV once
previously, this step will be skipped. If this is not the case, a
search for your remote will be performed. Follow the on-
screen instructions to pair your remote control (depends
on the model of the remote control).
4. Connect to your network
If you did connect your TV to internet via an Ethernet
cable before the initial setup begins this step will be
skipped. If you didn’t, your TV will search and list available
wireless networks at this point. Select your network and
press Select to connect to it. Refer to the Connecting to
the Internet section if you need further information. Press
Fast Forward button on your remote to skip.
After the internet connection is established, the TV will
check for the software updates and download the latest
software next, if any available. Please notice that this will
take some time.
5. Sign In with Your Amazon Account
You can sign in to your Amazon account on the next
screen. You need to be signed in to an Amazon account
in order to use Amazon services. This step will be skipped
if no internet connection has been established in the
previous step. If you don’t already have an Amazon
account you can set up an account by choosing ‘I am
new to Amazon’ option. You can press the Fast Forward
button to skip this step. A dialogue will be displayed for
confirmation. Highlight Do this later and press Select to
continue. If you skip this step some of the following steps
may dier or be skipped as well.
Once the account has been registered, you will be asked
whether you want to use the account you signed in. You
can choose to change the account, read the terms and
conditions, which will be accepted if you continue, at this
point. Highlight the symbol with three dots next to the
texts at the bottom side of the screen and press Select to
read and learn more about the related subject. Highlight
Continue and press Select button to proceed without
changing the account.
If you have connected your TV to internet via a WLAN
network a dialogue will be displayed at this point, asking
if you want to save your WLAN password to Amazon.
Highlight Yes and press Select to confirm and proceed.
Select No to proceed without confirmation.
6. Parental Controls
You can enable Parental Controls at this point or you
can do it later.
Note that, if you choose No Parental Controls, purchasing
and video playback without PIN will be allowed.
If you choose Enable Parental Controls option, you
will be asked to enter a PIN next. This is the Prime Video
PIN and it is related to your Amazon account. Use the
buttons on your remote as shown on the screen to enter
the PIN. You will have to enter it to access some menus,
services, content, etc. protected by this PIN. If you have
forgotten your PIN follow the link shown on the screen
to reset your PIN.
You will be informed about the feature on the next screen.
Press Select to continue.
You can review or change the parental control settings
later using the Parental Controls option in the Settings
> Preferences menu.
7. Prime Video
A brief information on the prime video services will be
displayed next. You can start your 30 day free trial at this
point. Highlight ‘No Thanks’ and press Select to skip.
8. Select Apps
In the next step you can select the apps you want to
download. Highlight Choose Apps and press Select to
proceed. The apps are free to download but some of
them may require payment for full access. Highlight No
Thanks and press Select to skip.
9. Scan for TV channels
You will be asked whether you want to scan for channels
in the next step. Highlight Yes and press Select button
to start the scan process. Highlight No and press Select
button to scan later.
Connections
Bringing it all together
Connections
15
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Help Menu,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
