The Network menu will display the strongest 3 wireless
networks your TV can find, your network is the one with
the word ‘Connected’ written under it.
Highlight your network, if you’re connected it will show
Connected under the Network name. On the right of the
screen it will show the Signal Strength and Security of
your connection. With your network highlighted press the
Play/Pause button to check your network. You will see
connection status of your network. Press the Back button
to exit this screen. If you want to forget the network press
the Options button while your network is highlighted.
Seeing All Networks
If you want to search for more networks, highlight See All
Networks and press Select. You will now see a list of all
the networks that your TV can find. If you scroll down to
the bottom of the list you also have the option to rescan
for networks.
Joining a Network Using WPS Button or PIN
If you can’t remember your WLAN password using the
WPS option temporarily disables your routers password
and allows you to connect to it without it.
Highlight your preferred WPS connection option and
press Select, then follow the on-screen instructions.
Advanced Network Settings
If you are confident in using network settings you can
manually setup a network by highlighting Join Other
Network and pressing Select. You will have to manually
type in all your desired network settings using the on-
screen keyboard.
If you have connected your TV via an Ethernet cable you
can also configure your network settings. This is also a
more advanced setting for users that are confident in
setting up networks.
Saving your WLAN Password to your Amazon Account
Your WLAN password can be saved to your Amazon
Account, this can be helpful if you would like to connect
other devices to the same network. The default setting
is O.
Highlight Save Wi-Fi Passwords to Amazon and press
Select. Your WLAN password will now be saved in your
account. It can be deleted at any time by selecting O.
Display & Sound
This menu houses all the settings and adjustments for
your picture and sound as well as other settings such as,
how your TV powers on, screen mirroring, screen saver
setting and HDMI CEC device control.
Highlight Display & Sound in the Settings menu and
press Select.
Picture Settings
Picture settings can be adjusted on each input, so
each input can be set to have its own picture settings.
For information on adjusting each setting refer to the
Customising TV Settings section of this manual.
For adjusting picture setting while viewing your TV, press
and hold the Home button and select Picture in the menu
on the right hand side of the screen.
Sound Settings
Sound settings can be adjusted here, for information
on adjusting each setting refer to the Customising TV
Settings section of this manual.
For adjusting sound settings while viewing your TV, press
and hold the Home button and select Sound in the menu
on the right hand side of the screen.
Power On
The Power On setting allows you to choose which state
you want your TV to switch on in, either the last input that
you were watching or the Home screen.
Highlight Power On and press Select. Highlight Home
or Last Input and press Select. A tick will appear next to
your choice.
Audio Output
The Audio Output menu has 5 options: TV Speakers,
Digital Audio Format, DTS DRC, AC4 Dialogue
Enhancer and Bluetooth Audio Sync.
Highlight Audio Output and press Select.
TV Speakers: In the TV Speakers menu you can switch
your TV’s built-in speakers on or o. You may wish to
switch them o if you have connected a soundbar.
Highlight TV Speakers and press Select to switch the TV
Speakers on or o.
Digital Audio Format: Depending on the type of audio
device you have connected you may need to adjust the
audio format that your TV outputs. The audio format can
be changed here.
Highlight Digital Audio Format and press Select.
Highlight your desired audio format PCM, Dolby Digital,
Auto, Pass-through then press Select. The default setting
is Auto.
DTS DRC: The DTS DRC menu enables DTS DRC to be
switched on or o.
Highlight DTS DRC and press Select to switch the DTS
DRC to on or o.
Advanced features
Getting the most from your TV
Advanced features
26
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Help Menu,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
