Volume Increments: Set the amount the volume
increases or decreases when you ask Alexa to change
the volume. The default increment is set to 4.
Press Rewind or Fast Forward to increase or decrease
the increments. Press Option to restore back to default
settings.
Infrared Options: Changes the infrared options. IR
Profile, Timing and Repetition options will be available.
Power Controls: Adjusts the power on/o settings for
your soundbar or receiver. Power On Delay, Power
Command and Power Control options will be available.
Fire TV Input: Change the input, to which your soundbar
or receiver will switch to for watching Fire TV.
Change Soundbar /Change Receiver: If you would like
to change the soundbar or receiver that’s connected to
your TV select Change Soundbar/Change Receiver.
Restore Soundbar Defaults /Restore Receiver Defaults
Restores all the settings that you may have changed back
to factory defaults. This option will be available if you
change the default settings.
Advanced Settings
Adjust the power timing if your soundbar or receiver
does not switch on/o.
Press Rewind or Fast Forward to increase or decrease
the increments.
Press Option to restore back to default settings.
Live TV
This menu allows you to tune in your TV, manage the
channels, set up a CI card and set parental controls.
Highlight Live TV and press Select.
Tuning in your TV
You should have already tuned in your TV during the initial
setup process. But if you skipped the channel scan step
or if you need to retune your TV follow these instructions.
Highlight Channel Scan and press Select.
You will be asked to check if your antenna cable is
plugged properly into the antenna input socket on your
TV. Press Select to proceed.
Highlight the country that you are in and press Select.
Select your scanning preference to install channels. TV
options will be available.
After selecting an option, the TV will search for digital
terrestrial broadcasts. Select the searching method and
press Select to start search.
You will be asked at some point whether you want to
clear existing channels, if you have installed channels
previously using the same search option. Highlight Yes
and press Select. All the previously tuned in channels will
be deleted. Highlight No, keep existing and press Select
to proceed without clearing existing channels.
While the search continues you can press the Select
button to cancel. When the initial setup is completed the
results will be displayed. You can choose to make changes
on the channel list or rescan at this point. Highlight Done
and press Select to finish the setup.
Automatic Service Update
You can allow your TV to automatically scan for network
operator changes when TV enters standby mode. Press
Select to turn this feature on and o.
Favourite Channels
You can view and manage your favourite channels here.
Highlight Favourite Channels and press Select.
If you do not have any favourite channels press Select
to add channels. Then select the source to view the
channel list. Highlight a channel and press Select
to add
this channel to your favourites.
If you have priorly added channels to your favourites
you can press Select to select the channels you want
to remove from your favourites. Then press Play/Pause
to confirm.
Manage Channels
Manage your favourite channels and select the channels
you want to display.
Highlight Manage Channels and press Select. Then
select the channel type. Available. Available options may
dier depending on the currently installed channel types.
You will now see the channel list with 3 tabs: All,
Favourites and Hidden.
All will show all the channels, Favourites will show all the
channels you marked as favourite channels and Hidden
will show all the hidden channels.
In the All tab you can choose to add a channel to the
favourites list by pressing Select or you can hide a channel
by pressing Play/Pause.
Live TV Sources
Manage your Live TV sources.
CI Card
Access your CI Card settings and information.
Advanced features
Getting the most from your TV
Advanced features
29
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Help Menu,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
