A countdown will start in the bottom corner of the screen.
You can also switch o the countdown by highlighting
O and pressing Select.
Note: The TV will switch o once the sleep time has
elapsed, a 1 minute warning will be shown.
Device & Software
This menu will give you information about your TV, show
you legal and compliance documents. You can also
restart or reset your TV back to factory defaults.
Highlight Device & Software and press Select.
About
If you need to find out any information about your TV
it should be displayed here. You’ll also see storage and
network information and you will also be able to check
for any available software updates.
Highlight About and press Select.
Your TV: Displays information related to your TV.
Storage: Show the available storage space on your TV
and on any external device that’s connected.
Network: Displays all the information related to network
settings.
Check for Updates: Displays your current software
version and when it was last updated. Press Select to
check for any new updates.
USB Drive
This menu will show you the available space on your
drive. You will also be able to eject or format the drive. This
menu will only appear if you have a USB drive connected.
Highlight USB Drive, the space available will be shown
on the right hand side of the screen.
Ejecting a USB Drive
Highlight USB Drive and press Select.
Then highlight Eject USB Drive and press Select. Now
remove your drive from the USB socket. The menu will
return back to the Device & Software root menu.
Formatting a USB Drive
Important: Formatting the USB drive will erase all
information on the USB drive. Once formatted this USB
drive can only be used by this TV.
Select this option if you intend your TV to use apps
stored on this drive.
Highlight Format to Internal Storage then press Select.
When formatting is complete select OK.
Developer Options
Enable ADB connections over the network.
Highlight Developer Options and press Select.
ADB Debugging: Press Select to turn on and o. Turn on
to enable ADB connections over the network.
Note that, turning this feature on will allow anyone
on your network to install applications from untrusted
sources.
USB Debugging: Press Select to turn on and o. Turn
on to enable ADB connections over USB for this power
cycle. This option will not be available if ADB Debugging
is set to OFF.
Note that, turning this feature on will make USB
accessories unavailable.
Install unknown apps: If you have installed an application
that requests permission to install other applications and
you want to grant permission, you can do this using this
option.
Legal & Compliance
To read all the legal and compliances notices regarding
your TV select this menu.
Highlight Legal & Compliance then press Select.
Note: Your TV will need to be connected to the internet
to access Legal & Compliance information.
Sleep
Your TV can be put to sleep.
Highlight Sleep then press Select. Your TV will go to
sleep. You can wake it up again by pressing the Standby
or
Select button.
Restart
If for some reason your TV is slow or locking up you may
want to restart it. This will re-boot your TV.
Highlight Restart then press Select. Confirm you want to
restart by selecting Restart and then press Select. Your
TV will now restart, this will take a few seconds.
Reset to Factory Defaults
If you want to totally reset your TV select Reset to
Factory Defaults. This will remove all personal data and
downloaded content from your TV. You should do this if
you sell your TV or give it to someone.
Highlight Reset to Factory Defaults then press Select.
Confirm you want to reset by selecting Reset and then
press Select. Your TV will now reset itself back to the state
it left the factory. This process will take a few minutes.
Advanced features
Getting the most from your TV
Advanced features
33
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Help Menu,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
