Why is there no sound coming from my Bush HORIZON?
If your Bush Clock Radio has no sound, there might be a few reasons: * Check if headphones are connected. If they are, disconnect them. * Make sure the volume is properly adjusted. * Verify that the power cord is correctly connected.
How to improve radio reception on Bush HORIZON Clock Radio?
If your Bush Clock Radio has poor radio reception, the issue might be due to a weak aerial signal. Try aiming the aerial for the best reception and ensure it is fully extended. Also, interference from electrical equipment such as TVs, video recorders, computers, thermostats, or fluorescent lamps could be the cause. Keep the unit away from other electrical equipment.
What to do if Bush Clock Radio buttons are not working?
If the buttons on your Bush Clock Radio aren't working, it could be due to electrostatic discharge. To resolve this, turn off the unit, disconnect it from the mains plug, and then reconnect it after a few seconds.
General| Brand | Bush |
|---|---|
| Model | HORIZON |
| Category | Clock Radio |
| Display Type | LED |
| Snooze Function | Yes |
| Radio Bands Supported | FM |
| Backup Battery | Yes |
| Alarm Function | Dual Alarm |
| Radio Type | Digital |
| Alarm Type | Buzzer, Radio |
| Power Source | Mains |
Your safety and the safety of others are important. Read safety instructions before operating.
Contact Bush Warranty for product failures. Discuss problems with service engineers.
Position cables safely, avoid humid conditions, protect from water, ensure ventilation, keep away from flames.
Disconnect from mains before cleaning with a soft cloth. Refer servicing to qualified professionals.
Identifies unit controls: STANDBY, SNOOZE, MODE/MENU, VOL, SELECT, ALARMS buttons and LCD Display.
Instructions for using controls for DAB+ and FM radio modes, including STANDBY, SNOOZE, and MODE/MENU.
DAB+ uses signals to overcome multipath distortion for better reception compared to analogue.
View broadcast text like DJ, artist, or song title information displayed on your radio.
Check local DAB+ coverage via website or SMS to confirm if you reside in a broadcast area.
Lists items included: DAB+ Radio, Power Adapter, User Guide. Place receiver away from hazards.
Extend aerial for best reception. Use 3.5mm stereo headphones with the rear jack.
Connect power, turn mains on, then press STANDBY to power the unit on or off.
Shift to another DAB+ program by navigating the list or use SELECT to choose a station.
Adjust the radio volume using the VOL- or VOL+ buttons.
View station details like Program Type, Signal Strength, Signal Quality, Scrolling text, Time and Date.
View signal strength via a bar display. Stations below minimum level may have audio dropouts.
Adjust compression levels (off, low, high) to manage sound level differences between stations.
Remove inactive stations from the list. Select 'Yes' to perform the prune function.
Store up to 10 DAB+ and 10 FM station presets. Select preset number and confirm to store.
Recall stored stations by entering Preset Recall, selecting the preset number, and confirming.
Change FM frequency by 0.05MHz increments using the navigation buttons.
Scan forwards or backwards for the next available station by pressing navigation buttons.
Configure scan to stop at strong stations only. Set audio to stereo or mono for weak stations.
Manually set time/date, choose auto-update, 12/24 hour format, and date format.
Set sleep timer for 15, 30, 45, 60, or 90 minutes for automatic switch-off.
Adjust backlight brightness for power-on and standby modes with 11 different settings.
Reset all user settings to default values. Station settings, time/date, and presets will be lost.
Configure alarm state, time, duration, source (Buzzer/DAB/FM), frequency, and volume.
Activate snooze (5-30 min) to delay alarm. Radio enters standby mode during snooze countdown.
Turn off alarm by pressing STANDBY. Alternatively, set alarm state to 'Off' in settings.
Navigate to the 'SW version' menu to view the radio's software information.
Solutions for 'No sound', 'Unit Buttons not working', and 'Radio poor reception' problems.
Details include speaker power, frequency range, display type, power supply, and dimensions.
12-month warranty for defects in materials/workmanship for domestic use. Excludes misuse, accidents.
Valid within country, must follow manual, excludes accidental damage, resale, or inexpert repair.
To Next Page
