FM Alarm Colck Radio
9
AC: 100-240V ~ 50/60 Hz 0.55MAX
All settings are memorized, however,the clock time could accasionally need to be
readjusted. In case of power failure, if backup batteries are not installed, the screen
will flash to indicate this power failure and the necessity to redo your settings.
Using your FM Alarm Clock Radio
Let’s get started
Power Supply
15. USB charge port for 5V 2.1A output
10.
11.Sleep indicator
12.Alarm 1 Radio indicator
14. USB charger port
for 5V 1A output
16. LED display
Alarm 2 buzzer indicator
13.Alarm 2 Radio indicator
18. Battery compartment
17. DC power external input
DC: 2*1.5V battery type AA (not included ) for backup
These batteries must be replaced every six months.
1.Insert the plug of power cord into a standard wall outlet.
2.Install the backup batteries in their compartment. Use only the size and type of
batteries specified . Respected the polarity indicated in the compartment. Improper
polarity can cause damage to the device . Donot attempt to recharge the batteries,
Setting the Time
1. In standby mode, press and hold CLOCK button, the display will flash, set
the time with HOUR+- and/or MINUTE+-
2. After 4 seconds, the current display will be automatically stored.
Backup System
To Next Page
Loading...
