Bush LED24127DVDCNTD - Connections

12
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Connector
Type
Cables
Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
Side Audio/Video
Connection Cable PC Audio Cable
(Supplied) (Not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
AV Connection Cable
(supplied)
HEADPHONE
Headphone
Connection
(side)
PC to YPbPr
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Getting Started
Connections
SIDE AV
SIDE AV
NOTE: When connecting a device via the YPbPr or Side AV input, you must use a connection cables
to enable connection. See the illustrations above. | To enable PC audio, you will need to use the SIDE AV
CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When using the wall mounting kit (optional), we recommend that you plug all
your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the
TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.