Caution: 2 people are required to
unpack and handle the appliance, it is
recommended that gloves are worn.
The appliance should be transported only in
an upright position. Do not tilt the appliance
greater than 45. The packaging as supplied
must be intact during transportation.
Do not move the appliance by pulling the door
or handle as it may damage your flooring and
wall coverings etc.
Ensure the supply cable is not caught under
the appliance during and after moving.
Carefully remove all packaging materials
including the foam base, dispose of correctly.
Ensure sufficient spacing is provided for the
appliance to be installed. Leave space on
back (10cm) to ensure proper ventilation.
The room for putting the tumble dryer must me
kept for proper ventilation.
Make sure that your machine is not placed on
the power cord.
Do not place the appliance near a heat source
or in direct sunlight.
Do not put any heavy objects on top of the
appliance. It will damage the appliance.
Do not install the appliance in moist and wet
place.
Adjust the feet at front to level the appliance.
It should be installed on a smooth surface to
avoid excessive vibration and noise.
Never unscrew the adjustable feet from their
housings.
Refer to section “User instructions” to prepare
your appliance for use.
To Next Page
Loading...
