14
Installation requirements
•
Transportation
Caution: 2 people are required to
unpack and handle the appliance, it is
recommended that gloves are worn.
The appliance should be transported only in
an upright position. Do not tilt the appliance
greater than 45°. The packaging as supplied
must be intact during transportation.
Do not move the appliance by pulling the
door or handle as it may damage your
flooring and wall coverings etc.
Ensure the supply cable is not caught under
the appliance during and after moving.
Carefully remove all package materials
including the foam base, dispose of correctly.
•
•
•
•
Never unscrew the adjustable feet from their
housings.
Refer to section “User instructions” to prepare
your appliance for use.
•
•
Installation
Ensure sufficient spacing is provided for the
appliance to be installed. Leave space on
back (10cm) to ensure proper ventilation.
Install the tumble dryer in a well ventilated
room.
Make sure that your machine is not placed
on the power cord.
Do not place the appliance near a heat
source or in direct sunlight.
Do not put any heavy objects on top of the
appliance. It will damage the appliance.
Do not install the appliance in moist and wet
place.
Adjust the feet at front to level the appliance.
It should be installed on a smooth surface to
avoid excessive vibration and noise.
•
•
•
•
•
•
•
Fig1 Fig2
Installing your < >tumble dryer
Caution: 2 people are required to unpack
the tumble dryer, it is recommended that
gloves are worn.
Carefully remove all packaging materials
Including the foam base, dispose of correctly.
Unpacking Tumble dryer
To Next Page
Loading...
