Functions
20
Ending the program – Cancelled by customer
To cancel the program:
1.Press “On/Off” button.
2.The machine will stop immediately.
3.Open the door and wait for five minutes to let the temperature inside cool down.
4.Remove the clothes.
Warning: The temperature inside the capacity may still be high. Take extra care when
remove the clothes.
Clean the drum and lit filter after each drying.
Child safety lock
This machine is equipped with a child safety lock ( ) to prevent any program interruption due to
the pressing of buttons during the drying operation. All the buttons the panel are deactivated when
the child safety lock is active except the On/Off button.
To activate the lock: press both Dryness and program button for 3 seconds, the child safety lock
indicator will be illuminated and denoting entering the child-lock state.
To deactivate the lock: press both Dryness and program buttons for 3 seconds, the child safety lock
indicator will go off denoting that the lock is released.
Overheat Safety device
This machine is equipped with an overheat safety device that
switches off the machine in the event of overheating. Should
the machine stop heating, turn the machine off and inspect lint
filter or exhaust outlet or ventilation of the laundry room.
Blockage on the filter & exhaust outlets (hose) and poor
ventilation in laundry room will cause the overheating on the
machine. Clean the blockage on filter & exhaust outlet and
open the window in the laundry room to improve the situation.
Wait for at least 10 minutes for the machine to cool down.
Then press the reset key at the back of the machine before
attempting to restart the machine.
To Next Page
Loading...
