Set the Delay End function to finish your
laundry at the time you select.
1. Select a programme and auxiliary function
(where applicable).
2. Press [Delay End] button repeatedly to
choose the delaying time from 0H to 24H,
1 hour per increment.
3. Press [Start/Pause] button to start the Delay
End function.
Choose the Programme--Setting end time--Start
Notes:
- The time you have set in Delay End means
the time remaining for the laundry to be
finished.
- If you change to another programme after
you have set Delay End, you will have to set it
again.
To Cancel the Delay End function, press [Delay
End] button repeatedly until the display shows
0H. If the programme has already started,
switch the appliance off and afterwards on and
select a new programme.
To Next Page
Loading...
