Using your washer-dryer
Getting the most from your appliance
Quick start
1.The washer-dryer will sound several times for 5 seconds.
2.It is recommend to close the water tap and pull out the
After washing :
3. Close the door
7. Press the 【start/pause】
2. Measure out the
detergent
1. Open the door and
Load the laundry
4. Plug the power supply
6. Select the Auxiliary function
5. Select the desired programme
power plug.
3.The machine will empty most of the condensed water from
the dryer along with the washer waste water. Only very little
water will be remain inside the drum / cavity. Please open
the door for one or two hours to dry up the remaining
water. It is not necessary to remove the water manually.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
30
Using your washer-dryer
To Next Page
Loading...
