12
BUTTONS & FUNCTIONS OVERVIEW
Power Off
Function
• “Safe” mode when replacing the SD card or batteries.
• When transporting the camera.
• When connecting camera to a computer’s USB port to
download your photos/ videos.
• When storing the camera. NOTE: Remove batteries
before storing for a long time. In OFF mode, your camera
still consumes power at a very low level unless the
batteries are removed.
Power On
Function
• When you are ready for the camera to begin taking
photos or video. NOTE: After you switch the power ON,
the motion indicator LED will blink red for about 10
seconds. This allows time to close the front cover, lock
the latch, and leave the monitored area. The camera
will take photos or videos automatically according to its
current settings when the PIR sensors detect motion.
Menu
Function
• Press once to activate MENU options on view screen,
press again to go back to the home screen.
• Allows you to change your specific settings for date &
time, photos and videos. (See Settings Menu).
To Next Page
Loading...