24
5) Contrast Value
This setting allows you to change the contrast between
the characters and background for all display screens
to make it easier to read in different lighting conditions,
or to suit your personal preference. From the Settings
page menu, select “Contrast Value” and press ENTER.
Use the UP and DOWN keys to adjust the contrast. The
four bars below the setting indicator let you preview
the effect on black and gray display graphics. After
adjusting the contrast setting, press ENTER to return to
the Settings page.
6) Yards/Meter
By default, the distances displayed on the YP GPS are
in yards. To change the distance units to meters, select
“Yard/Meter” from the Settings page and press ENTER
to toggle between “Y” and “M”. When nished, select
another item from the Settings menu, or press PAGE
to go to the PLAY screen.
7) Time Set
The unit automatically sets the clock display initially,
based on time data transmitted by the GPS satellites,
but this is based on GMT time. Therefore you will need
to adjust it for your local time zone. Select “Time Set”
The Settings Page
To Next Page
Loading...
