To Next PageTo Next Page
Need help?Do you have a question about the Butternut BUT-HF6V and is the answer not in the manual?
Lists key specifications and capabilities of the HF6V antenna.
Provides guidance on avoiding electrical hazards from power lines during installation.
Lists the necessary tools for antenna installation.
Lists items not included with the antenna but required for installation and optional accessories.
Guidelines for choosing an optimal location for antenna installation.
Step-by-step guide for installing the antenna's base mounting tube.
Explains the importance and function of the radial system for antenna efficiency.
Details on an optional accessory for the radial system.
Details on preparing and assembling aluminum tubing sections correctly.
General instructions and notes for the antenna assembly process.
Recommends using a specific lubricant for electrical connections during assembly.
Warns against damaging the insulator by hammering the mounting post.
Instruction for connecting tube B and B1 as part of the assembly.
Instructions for positioning and securing the 80/40 meter coil assembly.
Detailed instructions for mounting capacitors and their brackets.
Instructions for assembling the 30 meter coil support tube and coil/capacitor assembly.
Final adjustments for the 40 meter coil and its support.
Instructions for positioning and securing 15 meter wire clamps and tubes.
Instructions for positioning and securing 15 meter wire clamps on tubes.
Instructions for positioning the 15 meter wire clamp and marking the wire.
Instructions for tensioning and securing the 15 meter wire.
Critical warning about avoiding power lines during antenna setup.
Instructions for assembling the main antenna sections and raising the structure.
Instructions for installing the 75 ohm matching cable and connecting to the transmitter.
Critical warning about proper grounding of station equipment.
Instructions for checking and adjusting VSWR on the 10-meter band.
Instructions for checking and adjusting VSWR on the 15-meter band.
Procedure to find the lowest VSWR frequency for 80/75 meters and adjust coils.
Adjusting the base coil matching for optimal VSWR on 80/75 meters.
Procedure to find the minimum VSWR frequency for 40 meters and adjust coils.
Instructions for checking and adjusting VSWR on the 20-meter band.
Instructions for checking and adjusting VSWR on the 30-meter band.
Notes that adjustments for other bands generally don't affect 80/75 meters.
Discusses differences in tuning for above-ground vs. ground-level installations.
Recommends installing a Feedline Current Choke for elevated antennas.
Details on radial systems for elevated antennas, including multiband options.
Information on using metal masts or towers for antenna support.
Discusses alternative mounting methods like using central air systems or steel frames.
Guidelines for installing the antenna on mobile homes or RVs.
Discusses vulnerability to lightning and static induced transients.
Provides a list of common symptoms and their potential causes and solutions.
Addresses tuning issues on 80/160 meters and suggests systematic procedures.
Explains the necessity and methods for guying the antenna.
Illustrates a 4-point guying system for antenna stability and tilting.
Detailed breakdown of parts with reference numbers, descriptions, and quantities.
Contact information and resources for product assistance.
Details the product warranty terms and conditions.
General
