To Next PageTo Next Page
Need help?Do you have a question about the Butternut HF2V and is the answer not in the manual?
Lists key specifications and capabilities of the HF2V antenna.
Critical warnings about the dangers of installing antennas near power lines.
Lists necessary tools and additional materials for installation.
Explains the benefit of using a guying system for antenna stability.
Discusses choosing an appropriate location for antenna installation.
Provides specific information on radial wire placement and configuration.
Clarifies the purpose of a ground rod versus an RF ground system.
Describes the benefits and use of the optional radial plate accessory.
Instructions for handling and preparing aluminum tubing sections.
Critical caution against hammering the mounting post into the ground.
Suggests using specific lubricant for electrical connections.
Explains the function and application of coil shorting straps.
Provides starting points for coil adjustments for resonance.
Details the physical adjustment for the 80-meter coil.
Step-by-step guide for tuning the 80/75 meter band.
Instructions for adjusting the base matching coil (Q).
Details the physical adjustment for the 40-meter coil.
Guidelines for mounting the antenna above ground level.
Information on using top-loading wires for performance enhancement.
Detailed instructions and recommendations for guying the antenna.
Information about different capacitor types used in the antenna.
General| Radiation Pattern | Omnidirectional |
|---|---|
| Material | Aluminum |
| Impedance | 50 Ohms |
| Connector Type | SO-239 |
| Type | Vertical |
| Frequency Coverage | HF |
| Installation | Ground-mounted |
| Power Handling | 2000 Watts PEP |
| VSWR | 1.5:1 or less |
