JUMP START YOUR CAR
1
Insert the jumper cable into the jump starter and connect the
clamps to car battery (red to +, black to -).
2
The indicator of jumper cable turns solid green.
3
Start your car engine.
Warning: When using the Force Start Function, auto-detection and safety
features will be disabled.
1
Press the force start button for 5 seconds.
2
The indicator of jumper cable is green.
3
Start your car engine.
3 steps to fix the problem:
If three attempts fail when you correctly connected the clamps to your
car, you can use the Force Start Function to enter boost mode.
START
/STOP
· ABOUT THE FORCE START FUNCTION
START
/STOP
To Next Page
Loading...
