BUTURE BR700 - User Manual

User Manual
BR700 Jump Starter& Air Compressor
123
123
EN

Summary

Introduction and Key Features

Product Overview

Technical Specifications and Operation Guide

Recharge the Jump Starter

Instructions for recharging the jump starter unit using USB cables at home.

Recharge the Jump Starter (In Car)

Instructions for recharging the jump starter unit using a car socket.

Charging Your Devices

How to charge external devices using the USB output ports of the jump starter.

LED Light Operation

Instructions for turning the LED light on or off using the power button.

General Safety Precautions

Important safety guidelines and precautions before using the jump starter.

Jump Starting Your Car

Step 1: Insert Battery Clamps

Instructions for inserting the battery clamps into the jump starter unit.

Step 2: Connect Clamps to Battery

Connect the red clamp to the positive and black clamp to the negative battery terminals.

Step 3: Start the Vehicle

Procedure for starting the vehicle after connecting the jump starter.

Step 4: Remove Clamps

How to safely remove the battery clamps after the vehicle starts.

Inflating the Vehicle Tire

Safety Instructions for Tire Inflation

Important safety guidelines to follow before inflating vehicle tires.

Step 1: Activate Device and Set Pressure

Activate the device and select the desired tire pressure unit and value.

Step 2: Adjust Tire Pressure

Use the + and - buttons to set the desired air pressure for the tire.

Step 3: Connect Air Hose to Tire

Connect the air hose securely to the tire valve and check tire pressure.

Step 4: Inflate Tire

Start the air compressor and inflate the tire until the desired pressure is reached.

Smart Clamp Protection and Status

Smart Clamp Protection Scenarios

Details LED indicators, situations, and suggestions for smart clamp protection.

Smart Clamp Connection Status

Describes green light status for work and red light for connection issues.

Vehicle Start Failure

Troubleshooting steps for failing to start the vehicle or large starting current.

Successful Start and Protection State

Indicates successful start and entry into anti-recharge protection state.

Warnings and Product Information

General Warnings

Key warnings regarding product usage, safety, and environmental conditions.

Battery Disposal

Information on proper disposal of the self-contained, non-replaceable battery.

Warranty Information

Details about the company's 24-month warranty period from the date of purchase.

Contact Us

Contact information for additional assistance or warranty claims via email.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The BUTURE BR700 is a versatile and powerful device that combines the functions of a car jump starter and an air compressor, designed to provide essential assistance for vehicle owners in various situations. This compact power station is engineered for convenience, safety, and reliability, making it an indispensable tool for roadside emergencies and routine maintenance.

Function Description

At its core, the BR700 serves as a robust car jump starter, capable of delivering a high peak current to revive flat vehicle batteries. It is designed to jump start a wide range of vehicles, including those with all gas engines or diesel engines up to 8.0L, in a matter of 1-3 seconds. With a single full charge, it can perform up to 30 jump starts, offering significant peace of mind for frequent travelers or those with older vehicles.

Beyond its jump-starting capabilities, the BR700 integrates a powerful tire inflator, making it a 2-in-1 auto start aid and 150PSI tire inflator. This feature allows users to inflate car tires anytime and anywhere, ensuring optimal tire pressure for safety and fuel efficiency. The device includes a digital LCD air pressure display, enabling precise monitoring and setting of desired tire pressure.

The BR700 also functions as a compact power station, equipped with a massive 23800mAh capacity. It features dual USB output ports, allowing for fast charging of mobile phones, tablets, cameras, and other portable electronic devices. One USB port offers a maximum output of 12V/1.5A, while the other provides 5V/2.1A, catering to different charging needs. Additionally, a 12V 10A DC output port is included to power other car accessories, expanding its utility beyond jump starting and tire inflation.

For emergency situations, the device incorporates a 5W emergency LED light. This powerful light is designed to assist users in dark environments or during night-time emergencies, providing illumination for tasks like connecting clamps or inspecting tires.

Usage Features

The BR700 is designed for user-friendly operation, with clear indicators and intuitive controls.

For jump starting a vehicle:

1. The smart clamps are inserted completely into the jump starter, indicated by red and green lights flashing alternately.
2. The red clamp is connected to the positive electrode (+) of the car battery, and the black clamp to the negative electrode (-).
3. The vehicle can then be started. If the engine doesn't start on the first attempt, it's recommended to disconnect the clamps, wait at least 20 seconds, and then reconnect.
4. Once the vehicle is started, the battery clamp should be removed from the car battery and the jump starter within 30 seconds. The smart clip features a green light that stays on when it's in work status, indicating a proper connection.

For inflating tires:

1. The device is activated by pressing the Power Button, and the R Button is used to activate the LCD Air Pressure Display and select the preferred pressure unit (psi, bar, kPa, or kg/cm²).
2. The '+' and '-' buttons allow users to increase or decrease the desired air pressure value, which is shown on the LCD display. It's important to check the car's standard tire pressure, usually found in the vehicle's user manual or on a label near the B pillar, driver's seat, or fuel door.
3. The dust cap is removed from the tire valve, and the air hose from the BR700 is securely connected to the tire valve, fixed by pressing down the handle. The current tire pressure will then be displayed.
4. The ON/OFF Button is pressed to start the air compressor. The device will automatically shut off once the pre-set pressure is reached. After inflation, the ON/OFF Button should be turned off, the air hose disconnected, and the dust cap replaced.

For charging devices: Users can connect their electronic devices to the USB output ports using their original USB cables. The power button is pressed once to initiate charging, and the power level indicator shows the battery level.

For the LED light: The LED light can be turned on or off by pressing and holding the Power Button for 3 seconds.

Maintenance Features

To ensure the longevity and optimal performance of the BR700, several maintenance practices are recommended:

• Recharging: It is advised to recharge the jump starter every 3-4 months, even if it hasn't been used. This helps maintain the efficiency and prolong the service life of the internal battery. The device can be recharged at home using a universal USB wall adapter (5V 2A or above) and the included USB C cable, or in a car using a USB car adapter (not included) and the USB C cable.
• Storage: The jump start cables should be disconnected from the BR700 after each use and stored separately. The product's power level should be checked at least every three months, and it should be charged in time if low.
• Environmental Conditions: The device should be used in a dry, well-ventilated area and never submerged in water or exposed to rain or moisture. It should also be kept away from fire, intense heat, or flammable liquids. Charging should occur within temperatures between -20°C and +75°C.
• Tire Inflator Usage: To extend the service life of the air compressor, it should not be used to inflate for more than 8 minutes at a time. If extended periods of inflation are necessary, the device should be allowed to rest for 5 minutes after every 8 minutes of use to cool down.
• Safety Precautions: Before jump starting, all electronics in the car (radio, lights, etc.) should be turned off. The vehicle's battery terminals should be clean to ensure good conductivity. It's crucial to properly identify the positive (+) and negative (-) terminals and avoid connecting the red clamp to the vehicle battery's negative terminal or the black clamp to the positive terminal. Also, the metal teeth of the black clamp should not touch the metal teeth of the red clamp when connected to the jump starter. When adjusting clamps, the jump starter should be disconnected first to prevent minor sparks.
• Battery Disposal: The battery within the BR700 is self-contained and not consumer replaceable. When the battery no longer holds a charge, it must be disposed of properly according to local regulations. Following proper charging practices will help maximize the battery's life.

The BUTURE BR700 is a comprehensive and reliable solution for vehicle owners, offering essential functions with a strong emphasis on safety and ease of use.

BUTURE BR700 Specifications

General

Brand	BUTURE
Model	BR700
Type	Remote Starter
Remote Control Range	Up to 3000 feet
Engine Start	Yes
Keyless Entry	Yes
Security System	Yes
Compatibility	Vehicles with automatic transmissions
Battery Life	Up to 12 months