In Car:
1.plug the USB car adapter(not included)into the car socket
2.connect the USB C cable (included ) to the unit.
Note: It is recommended to recharge the Jump starter every 3-4months to maintain
the efficiency and prolong the service life of the internal battery even if the unit has
not been used.
Charging your devices from the USB output
Use the original manufacturer's USB cable that came with your device and plug it
into one o
f the USB output ports.You can charge two devices at the same time.One
of the ports has a maximum output of 12V/1.5A while the other has a maximum
output of 5V/2.1A.Press the power button once to begin charging your device.The
power level indicator will show the battery level.To check the power capacity again,
simply press the power button once.
LED Light
Please press&hold Power Button for 3 seconds to turn on / of
f the LED light.
Safety Precautions
By owning a Jump Starter, you have everything you need to jump start a vehicle-no
need to wait for help. BR700 to the rescue!
We know you're excited, but before jumping your vehicle, please be sure to take
some precautionary steps:
-Read your vehicle owner's manual first as the manufacturer may have specific
steps and precautions that pertain to your vehicle.
06
EN
To Next Page
Loading...
