Distributed Energy Storage System Build Your Dreams
1
1 Brief Introduction
The distributed energy storage system (DESS) is designed and developed by BYD Auto Industry
Company Limited, and can be widely used in residential and commercial applications. DESS is a
power supply device with multiple working modes. It can operate in different working modes to suit
a range of requirements. In this way, the system provides the user with a flexible energy storage
system.
This manual outlines the specifications, operation and installation of DESS-B08P03A-A.
2 Installation
Before installation, please check whether the cabinet and components inside the cabinet are
completed and have not been damaged in transit. If you have any questions, please contact your
local agent or the supplier BYD Auto Industry Company Limited.
NOTE: During the installation and operation process, it is forbidden for installer/customer to
change the default settings and internal wiring of the DESS, the doing so will void the warranty.
If there are any special requirements needed, please contact your local dealer for support.
2.1
Component List
After unpacking the system, please refer to the following table to check whether the components
are complete, and free from damage.
Table 2.1 System Component List
System Cabinet (incl. 4 battery modules, 1BMS, 1 Touch Screen, 1 inverter, etc.)
To Next Page
Loading...