BYD AUTO F0 Owner’s Manual
126
2. Put out the headlight dustproof
sleeve, pull out the Low beam light
connector. If the connector is too
tight, please twist it.
3. Release the bulb fixing spring and
take out the bulb.
4. Replace the bulb.
The steps of installation are opposite to the
disassembly.
You don’t have to refocus after replacing
the bulb. If you need to refocus, please
contact the service store authorized by
BYD.
High beam light
The steps of high beam is the same as the
Low beam light, ditto.
To Next Page
Loading...
