BYD F0 - Rear Windshield Defrosters (Optional)

BYD AUTO F0 Owner’s Manual
40
Rear windshield wipers and
washers
To turn on the front windshield wipers, the
ignition key should be in position “II”.
Turn the rear wiping and washing knob to
position “ON” (position 1).
To eject detergent, rotate the rear wiping
and washing knob upward or downward as
far as possible (position 2 or position 3).
After released, the knob can automatically
return.
For details on detergent addition, please
refer to “Detergent addition” in Part 3 of
Section 7.
Notice
 Do not turn on the water wipers
when the front windshield is dry;
otherwise, the glass may be scraped.
Rear windshield defrosters
(optional)
To remove fog or frost on the rear
windshield, press this switch down. The
ignition key should be in position “II”.
The thin electric heating wires in the rear
windshield can quickly make the rear
windshield clear. At the same time, the rear
windshield defroster switch indicator turns
on, indicating the defrosters are working.
The defrosters can be turned off by pressing
this switch again.
When the rear windshield becomes clear,
make sure the defrosters are turned off.
Long-time working of the defrosters may
lead to battery discharge. The defrosters are
not designed for drying raindrops and
snowmelt.
Notice
 To prevent battery discharge, turn
off the defrosters when the engine is
stopped.
 When cleaning inner surface of the
rear windshield, take care not to scrape
or damage the electric heating wires or
the connecters.