BYD F0 - Page 20

BYD AUTO F0 Owner’s Manual
17
2. Stand in front of the car, draw upward
the assistant handle of the engine hood
lock and lift the engine hood.
As shown in the above figure, hold the
protection area and remove the engine hood
bracket from its seat.
Notice
 Hold the protection area to
avoid burning.
Move the engine hood bracket as shown in
the above figure.
3. Insert the engine hood bracket in the
groove to keep the engine hood open.
Before closing the engine hood, check
whether there is any tool or rag left in the
engine hood. Place the engine hood bracket
back into its seat and then put down the
engine hood and check whether it is locked
up. If necessary, press its front edge to lock
it up.
Protection Area