BYD AUTO F0 Owner’s Manual
62
(1) Air blower speed regulation knob
Turn this knob to regulate the fan speed of
the air blower—clockwise to increase the
wind speed and anticlockwise to decrease
the wind speed.
(2) Cool/hot wind selection knob
Turn this knob to adjust the
temperature—clockwise for increase and
anticlockwise for decrease.
(3) Outlet mode selection knob
Turn this knob to adjust the direction of the
gas flow outlet.
1) Instrument panel—air flows come
mainly from the air vents of the instrument
panel.
2) Double layer—air flows come mainly
from air vents of the floor and the
instrument panel.
3) Floor—air flows come mainly from
air vents of the floor.
4) Floor/windshield—air flows come
mainly from air vents of the floor and the
windshield.
It is used together with the inner-outer
circulation mode selection slider in the outer
circulation position.
5) Windshield—air flows come mainly
from air vents of the windshield. It is used
together with the inner-outer circulation
mode selection slider in the outer circulation
position.
For settings of the outlet mode selection
knob, refer to the “—outlet mode
settings” introduced below.
(4) Inner-outer circulation mode
selection slider (with air conditioner)
1) Inner circulation—to re-circulate air
in the vehicle.
2) Outer circulation—to introduce
outside air in the vehicle.
(5) “A/C” switch
To turn on the air conditioning system, first
turn the air blower speed regulation knob to
a position other than “
“ and then
press the “A/C” switch. At the same time,
the working indicator of the switch will
shine. Press the “A/C” switch again or
turn the air blower speed regulation knob to
position “ “ to turn off the air
conditioning system.
To Next Page
Loading...
