BYD F0 - 9. Other devices

BYD AUTO F0 Owner’s Manual
64
remove frost and fog of the windshields.
2) Without air conditioning
air blower speed——any position other
than “ “
temperature
——heating position (red
region)
air flow
——floor
(2) Cooling (with air conditioning)
To get the best effect, set the controller as
follows:
air blower speed——any position other
than “
“
temperature
——cooling position (blue
region)
air introduction——outer circulation
(outside air)
air flow
——instrument panel
air conditioner——on
z For fast temperature decrease, select
the inner circulation mode and keep it for
minutes.
(3) Ventilation (with air conditioning)
To get the best effect, set the controller as
follows:
air blower speed——any position other
than “
“
temperature
——cooling position (blue
region)
circulation mode——outer circulation
(outside air)
outlet mode
——face blowing
AC switch——off
(4) Defogging (with air conditioning)
Interior of the front windshield
Optimized settings
air blower speed——any position
other than “
“
temperature regulation——heating
(red regions); cooling (blue region)
circulation mode——outer circulation
(outside air)
outlet mode——defogging
AC switch——on
z In damp whether, do not blow the
windshield with cold wind; otherwise, more
fog will be produced on the windshield due
to inside-outside temperature difference.
(5) Defrosting
Exterior of windshields
Optimized settings：