BYD Suri - Page 206

BYD Suri Owner‘s Manual
Maintenance7-22
surface of the bulb glass will cause
the bulb to overheat, thereby
breaking.
High beam of headlights
1. Close the Start button, and then
open the hood. If the driver's side bulb
needs replacing, please remove the
battery. Please replace the
passenger's side bulb by following
step 2.
2. Press the reed and unplug the
electrical connectors.
3. Take out the sealed cap.
4. Unplug the earth line and power
line, and then press the circlip and pull
out it towards the outside to take out
the bulb.
5. Ensure that the new bulb base
matches the bulb mounting stand
properly after the replacement with a
new bulb and that the lamp is fixed
after pressing the circlip and pushing
it into the holder.
6. Plug in the power line and earth line,
and ensure that the lines are
completely and firmly connected.
7. Cover the sealed cap.
8. Plug in the electrical connector and
ensure that it is fully inserted.
9. (Driver's side) fit the battery.
10. Turn on the headlights to test the
new bulbs.
Low beam of headlights
1. Close the Start button, and then
open the hood. If the driver‘s side bulb
needs replacing, please remove the
battery. Please replace the
passenger‘s side bulb by following
step 2.
Power line
Circlip
Earth line
Take out the
sealed cap.
Press the reed