BYD Suri - Page 82

BYD Suri Owner‘s Manual
Instrument and Maintenance Indicator 1-74
Menu functions are listed as
follows:
1. Time: set the current time of
multi-functional display
Display
Item
Function
Time Menu name
Automatic
Synchroni
zation to
Satellite
Time
Display currently-set
functional status of the
automatically
synchronous satellite
time, which can be
directly set.
09：00
Display the currently set
time, which can only be
set after entering the
sub-menu.
Back Back out the time menu
and get back to the
previous menu.
1.1 Automatically synchronous
satellite time (with DVD)
Start or stop the following functions:
when ―Start/Stop‖ switch is switched
to ―IGNITION ON‖ mode,
multi-functional display automatically
synchronizes the satellite time.
2. Maintenance: set maintenance
function and status.
Maintenance function is started. If
maintenance time is expired or has
expired and ―Start/ Stop‖ button is in
―IGNITION ON‖ mode, information
display will show the corresponding
prompt message.
Display Item Function
Maintenance Menu name
Maintenance
Time XXX
Days
If the currently-set
maintenance time
stops or has stopped
this function, it will
show ―Close‖, which
can be directly set.
Maintenance
Mileage
XXXXX km
If the currently-set
maintenance mileage
stops or has stopped
this function, it will
show ―Close‖, which
can be directly set.
Back Back out the
maintenance menu
and get back to the
previous menu.
2.1 Maintenance time: set
maintenance time status.
2.2 Maintenance mileage: set
maintenance mileage status.
2.3 Check: check currently remaining
maintenance time and mileage.
3. Backlight: set backlight color and
relevant functions of instrument dial
plate.
Display Item Function
Backlight Menu name
Color
Display currently-set
dial plate color, which
can only be set after
entering the
secondary menu.
Speed
Discoloration
Reminder
Display the
currently-set speed
discoloration reminder
function, which can be
directly set.
Automatic
Brightness
Adjustment
Display the
currently-set
automatic brightness
adjustment functional
status, which can be
directly set.