Need help?Do you have a question about the Byron DB302 and is the answer not in the manual?
General| Type | Doorbell |
|---|---|
| Wireless | Yes |
| Colour | White |
| Power Supply | Battery |
| Weight | 150 g |
Mount the bell push by using its back plate as a template for marking installation points.
Ensure the UP arrow on the bell push is correctly aligned upwards during installation.
Insert wall plugs and attach the back plate to the wall using the provided screws.
Clip the bell push onto the secured back plate until it makes an audible click.
Connect the door chime unit to a 220-240V 50Hz socket within the 30M operating range.
Initiate melody selection by pressing the dedicated button on the front of the chime unit.
The chime will play the newly selected melody to confirm the change.
Press the select button again to cycle through and choose the next available melody.
Do not position the bell push or chime near metallic surfaces to prevent reduced operation range.
Check operating performance on UPVC doors, as internal metal frames may affect signal.
Tip: Slightly adjust the bell push's left/right position or place on an external wall for optimal performance.
