OPERATIONS
3. Press the button on the player to turn on the player, if there is no disc, "disc"
4.
1. Install 2 "AA" batteries or using the adapter for power supply.
will appear on display.
Slide the OPEN switch to right side and release to open the disc cover, "OPEN"
will appear on display.
5.
7. During playing:
Put a CD disc on the CD compartment with the label side facing up and close the
cover gently, the player will start playing the disc automatically, the track number
and playing time will appear on the display.
Press the button once to stop, the total number of tracks and playing time
will appear on display; press the button once to play from the first track.
6. Connect the earphone plug to the earphone jack directly to listen privately.
2. Before turning on the player, slide the LOCK switch on the bottom of the unit to
right side to unlock button function.
Press the button once to pause, the playing time will flash on display;
press the button again to resume playing.
Press the M/T button to repeat one track playing " " will appear on
display; press it again to repeat all tracks " " will appear on display;
press it the third time to play randomly " " will appear on display; press
it the fourth time to resume normal playing.
1
Press and hold the M/T button until "00" appears on display, then press the
M/T button repeatedly to browse the timer time setting (10, 20, 30, 40, 50, 60)
minutes, press and hold the M/T to select and confirm the setting time, when
the time arrives, the player will turn off.
Press the E/P button to turn on/off the Electronic Shock Proof function. Press
and hold the E/P button to program, "00" will blink on display, using the
or button repeatedly to select the desired track, press and hold
the E/P button to confirm storing, repeat the same steps to program up to 20
tracks. Press the button to start program playback.
11
●
●
●
●
●
To Next Page
Loading...
