What to do if C.T.M. Scooter will not move when key is turned on?
If your C.T.M. Scooter doesn't move when you turn the key on, first check the Battery Gauge on the control panel to ensure all the LED lights are on. Next, verify that the Self-Diagnostic Warning Light is steady. If it's flashing, this indicates a problem. Also, check all electrical connections to ensure they are secure.
What to do if C.T.M. HS-125 battery voltage is too low?
If the battery voltage of your C.T.M. Scooter is too low, check the battery condition and connections.
What to do if C.T.M. Scooter battery voltage is too high?
If the battery voltage of your C.T.M. Scooter is too high, check the battery condition and connections.
Details the function of the speed dial, warning light, and battery gauge.
Explains the operation of the thumb levers for movement and acceleration.
Describes the tiller locker latch pawl for adjusting steering column position.
Covers seat locker, height adjuster, armrest width, and legroom adjustments.
Details the rear compartment cover, anti-tip wheels, and free-wheeling lever.
Provides guidance on hill climbing, descending slopes, and curb climbing.
Instructions on how to clean the scooter using a damp cloth and mild soap.
Recommends periodic inspection and advice on storing the scooter in a dry location.
Addresses troubleshooting when the battery charger light fails to turn green.
Provides steps to diagnose why the scooter does not move when the key is turned on.
To Next Page
General
