What to do if C.T.M. HS-589 5 battery charge is too high causing drive inhibition?
If your C.T.M. scooter experiences drive inhibition due to excessive charging while traveling downhill or decelerating, turn the scooter off and then on again. If the problem persists, reduce your speed when descending the slope.
What to do if C.T.M. HS-589 5 Scooter has current limit time-out?
If your C.T.M. scooter experiences a current limit time-out because it has drawn too much current for too long, turn the power off. Wait a few minutes, and then turn the power back on.
What to do if C.T.M. Scooter thumb lever is not in neutral position when turning key switch on?
If the thumb lever on your C.T.M. scooter is not in the neutral position when you turn the key switch on, return the thumb lever to neutral. Then, turn the power off and back on again.
What to do if C.T.M. HS-589 5 Scooter brake fault is inhibited?
If the brake fault is inhibited on your C.T.M. scooter, ensure that the park-brake release lever is engaged. Also, check that the motor/park-brake connector is firmly plugged in. Inspect the park brake and wiring for any open or short circuits.
What to do if C.T.M. Scooter battery charge is too high?
If your C.T.M. scooter's battery charge is too high, unplug the charger if it is plugged in, or turn the Charge/Run switch to Run.
How to fix C.T.M. HS-589 5 when battery charge is running low?
If your C.T.M. Scooter's battery charge is running low, recharge the batteries as soon as possible.
How to fix C.T.M. Scooter when battery charge is empty?
If your C.T.M. Scooter's battery charge is empty, recharge the batteries.
Categorizes sources of electromagnetic interference into three types for user awareness.
Provides critical instructions to prevent unintended scooter movement or brake release due to EMI.
Details the function of key controls like the main switch, speed knob, panel buttons, and throttle.
Outlines essential pre-operation checks and fundamental driving techniques.
Details the process for safely disassembling the scooter into manageable parts for storage or transport.
Provides abbreviated instructions for correctly reassembling the scooter after disassembly.
Explains the battery charging process and how to interpret the status indicated by LED lights.
Provides guidelines for cleaning and maintaining the scooter's body cover and seat upholstery.
Lists diagnostic flash codes, their impact on the scooter, and troubleshooting notes.
Details the technical specifications for both the HS-588 and HS-589 mobility scooter models.
To Next Page
General
