EasyManuals Logo

C.T.M. HS-890 User Manual

Default Icon
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Instruction Booklet8-Series
OPERATING YOUR SCOOTER
7
You could make the following adjustments to increase your comfort when driving.
adjust seat height and location
adjust armrest width to comfortable position.
adjust legroom.
This scooter has automatic braking system. Release the thumb lever
and brake will stop scooter.
1.Before operating your scooter, check the following:
free-wheeling lever in D
speed dial knob is at turtle picture.
2.Sit on scooter and turn on key, Battery Gauge meter should be indicate at F.
The Self-Diagnostic Warning Light should not be blinking.
3.When your hands rest comfortably on handlebars, the thumb levers should be
within easy
reach. The right lever moves scooter forward, the left one moves it backward. When you
release both levers, scooter will stop.
4.Steer scooter by turning tiller toward the way you want to go.
5.Practice driving where there are is No obstacle. Start at the slowest speed and drive
forward and backward; make some turns. As you get more comfortable, you can increase
speed by turning speed dial toward picture of rabbit.
6.
If Battery Gauge indicates E, you should plan to recharge batteries very soon.
7.If scooter stops, locate the circuit breaker on top of battery pack. Push it and try
driving again.
8.When you are finished riding, turn off the key before getting off.
9.If you are finished riding for the day, immediately recharge batteries.
See CHARGING THE BATTERIES, page 12.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the C.T.M. HS-890 and is the answer not in the manual?

C.T.M. HS-890 Specifications

General IconGeneral
BrandC.T.M.
ModelHS-890
CategoryMobility Aid
LanguageEnglish

Related product manuals