Need help?Do you have a question about the Cabela's GETAWAY 10x14 CABIN TENT and is the answer not in the manual?
Steps to take apart the tent after use, reversing the assembly process.
Lay the tent body flat and loosely stake out the four corners.
Assemble poles, run fiberglass poles through sleeves, and connect to angled connectors.
Insert metal poles into connectors and attach clips to corner pins.
Lay rain fly over tent, align awning flap, and attach buckles and hook/loop tabs.
Adjust corner stakes, set remaining stakes, and stake out guy lines.
Stake out awning sides, insert awning poles, and attach gear loft.
To Next Page
General
