Cablematic SimPal-T4 - About the SMS Command

To Next Page

To Previous Page

SimPal-T4 POWER SOCKET USER MANUAL

Family users (“Family”):

There are four families have authorization to use commands of switch on or cut off the socket

output, check socket temperature value or receive power status change alert.

The other mobile phone users have no authorization to control the socket.

2.2 About the SMS Command

 SMS command format: #code#content#.

 The maximum digits that are allows for the phone number is sixteen.

 SimPal-T4 will reply to the user after it receives the SMS command.

 Note