SimPal-T4 POWER SOCKET USER MANUAL
3.7.2 Set thermostat control parameters
Method
Master sends following SMS message in order to:
Set thermostat control parameters: #24#0#mode#low-temp#high-temp# (15)
Mode parameter can be 1 or 2, Warming mode is 1, cooling mode is 2;
Temp range should be within -10 to 50 degree.
For example #24#0#1#15#25#, it means set SimPa-T4 thermostat control parameter, work with
warming mode, and turn on socket when temperature lower than 15 degree, turn off socket
To Next Page
Loading...