Need help?Do you have a question about the Cablescan 90HV Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Accuracy | ±1% |
| Resolution | 0.1Ω |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Continuity Threshold | 1Ω to 100Ω |
| Insulation Resistance Threshold | 1MΩ to 100MΩ |
| Interface | RS-232 |
| Operating Modes | Continuity, Insulation, Hi-Pot |
| Voltage Range | 100V to 750V |
Describes the Series 90 and 90HV test systems and their applications, including test point capacities.
Details the Series 90L4, L8, and H8 low and high-voltage models controlled by PC.
Outlines the components of the Series 90 system, including expansion cabinets and controller.
Describes the components of the Series 90HV system, focusing on expansion cabinets.
Details the hardware and interface of the Series 90/90HV system controller.
Explains the role, types, and configurations of expansion cabinets in Series 90 systems.
Step-by-step guide for basic system hookup and adding expansion cabinets.
Describes how to select diagnostic tests, configure settings, and use the Test Selection Window.
Detailed descriptions of available low-voltage diagnostic tests.
Detailed descriptions of available high-voltage diagnostic tests.
Step-by-step guide for performing low-voltage calibration tests using TestDiag.
Step-by-step guide for performing high-voltage calibration tests using TestDiag.
To Next Page
