Need help?Do you have a question about the Cablescan 90L4 Series and is the answer not in the manual?
General| Brand | Cablescan |
|---|---|
| Model | 90L4 Series |
| Category | Measuring Instruments |
| Language | English |
Overview of Series 90 and 90HV test systems, their features, and applications.
Overview of Series 90L4, 90L8, and 90H8 low and high-voltage models, their features and applications.
Guidelines for connecting power, including grounding requirements and warnings.
Emphasizes the importance of proper grounding for safe operation and continuity.
Describes the rear panel of the system controller, including its slots and typical interface ports.
Details the Cablescan I/O Board, its function, and external connections for communication.
Step-by-step instructions for connecting the Series 90/90HV system controller and expansion cabinet.
Guide on how to connect additional expansion cabinets to the Series 90/90HV system.
Instructions for connecting Series 90L4/L8/H8 testers to a PC via serial or USB.
Steps for connecting the Series 90L4/L8/H8 to a PC using a serial port.
Steps for connecting the Series 90L4/L8/H8 to a PC using a USB port.
Guide on installing scanner boards in Series 90E9 and 90E32 expansion cabinets.
Instructions for installing scanner boards in the Series 90HV23 expansion cabinet.
Details on installing scanner boards in Series 90L4, 90L8, and 90H8 single-cabinet systems.
Introduction to TestDiag software, its purpose, and covered topics.
Step-by-step instructions on how to launch and open the TestDiag application.
Overview of the TestDiag screen layout and its main components.
Description of the Application Menu and its functions for printing and settings.
Explains the Status Banner, its color coding, and messages indicating tester status.
Describes the Test Selection Window for choosing diagnostic tests based on tester type.
Explains where all test results are displayed within the TestDiag interface.
Details the information provided in the Status Bar, including tester status and test point count.
Instructions for accessing the Tester Settings dialog to configure tester type and communication port.
Explains how to specify the connected tester type for TestDiag.
Details how to specify the PC communication port for tester connection.
Controls for starting/stopping self-diagnostic tests and entering Probe Search mode.
Initiates diagnostic tests based on selections, with a safety warning for high-voltage testers.
Group used during the calibration of the tester.
Measures system capacitance for offset adjustments, run when values are low or hardware changes.
Measures high voltage characteristics and configures tester for optimal performance.
Window to select diagnostic tests based on tester type, with grayed-out options for inapplicable tests.
Describes when High-Voltage Tests are available for Series 90HV and requirements like shorting bars.
Explains the purpose of calibration for maintaining system accuracy and verifying specifications.
To Next Page
