17
8. TTL Pass-through
The V6 transceiver comes with a multi-system
shoe that supports TTL pass-through.
While the V6 does not transmit TTL signal
wirelessly, it is designed to pass TTL
signal from camera to ash via the
transmitter (TX) and vice versa.
The multi-system shoe supports TTL
pass-through of Canon, Fujif ilm, Nikon,
Olympus, Panasonic, and Pentax systems.
Make sure that camera and ash unit belong
to the same TTL system.
Wit h T T L p a s s -t h r o u g h, t h e T T L a s h e s
behave as they would when directly
connected to the camera hot shoe. The V6
will work as a wireless ash commander while
s u p p o r t i n g a l l t h e a u t o m a ti c f e a t u r e s (e.g.,
automatic ash output via TTL metering,
To Next Page
Loading...
