20
3. Turn the lock lever of the V6 to the
right to lock the multi-system shoe
(m a l e).
4. When detaching the V6 from the camera’s
hot shoe, turn the lock lever to the left
t o u n l o c k t h e m u lti- s y st e m s h o e (m a le).
Otherwise, the multi-system shoe (male)
may be damaged.
Note: At t a c h y o u r a s h t o t h e V 6 a s y o u
would to the camera’s hot shoe. If your ash
is not locked securely on the Multi-System
S h o e (fe m a l e), t r y h a lf-lo c k i n g t h e a s h a n d
retracting it slightly from the Multi-System
Shoe until the locking pin hits the pinhole.
T h e n lo c k y o u r a s h f u l l y t o t h e V 6.
The V6 control panel is equipped with a Menu
button , an OK button , and a selection
dial for quick access to different functions
and the conf iguration menu.
The Menu button accesses the conf iguration
menu. In the main screen, pressing will
9.3
Buttons
and Dial