Cactus V6 - Flash Profile Learning Fails

67
2. Flash Prof ile Learning Fails
LCD DISPLAY POSSIBLE CAUSE SOLUTION
LCD shows
error
messages
during ash
learning
1. T h e  a s h
model is not
supported
Check Section
7.1.3 for the
compatibility of
 a s h m o d el s f o r
ash prof ile
learning
2. T h e  a s h i s
powered by
depleted
batteries and
producing
unstable
output of
power
Replace the
batteries of the
ash
3. The distance
between the
wall and the
V6 is too
close or too
far
- Position the V6
a n d t h e  a s h
facing a white
wall at a
dista nce of
1 meter
- Use a light
stand or tripod
to f ix the
positio n of
the V6
4. The ambient
light around
the scene is
too prominent
or unstable
Try performing
t h e  a s h le a r n i n g
in an enclosed
space with low and
stable ambient
light