5-7
6. Connect the red
positive (+) cable to
the remote positive (+)
terminal location on the
vehicle with the dead
battery. Use a remote
positive (+) terminal
if the vehicle has one.
7. Don’t let the other end
touch metal. Connect it
to the positive (+)
terminal location of the
vehicle with the good
battery. Use a remote
positive (+) terminal if
the vehicle has one.
8. Now connect the
black negative (
-) cable
to the negative (
-)
terminal location of the
vehicle with the good
battery. Use a remote
negative (
-) terminal if
the vehicle has one.
Don’t let the other end of the cable touch anything
until the next step. The other end of the negative (
-)
cable doesn’t go to the dead battery. It goes to a
heavy, unpainted metal engine part or to a remote
negative (
-) terminal on the vehicle with the
dead battery.
To Next Page
Loading...
Need help?
General
