TRI-ZONE AUTOMATIC CLIMATE
CONTROL SYSTEM
Escalade’s Tri-Zone Automatic Climate
Control System features dual zone
operation in the front and single zone
operation for rear seat passengers.
Front Dual-Zone Climate Control
System
Adjust settings for automatic
operation
1 Push the AUTO button and adjust the
temperature knob (“2”) to the desired
temperature to set automatic air
delivery mode, fan speed, A/C and
recirculation functions for the driver.
(Note: Because this is an automatic
system, the A/C mode is the default
setting.)
Set same temperature for driver and
front passenger
1 Press and hold the AUTO button for
four seconds.
Select air distribution manually
3 Press and release the MODE button
until the desired source of air is
indicated on the display.
Manually raise or lower fan speed
4 Press the upper or lower portion of
the FAN control button.
ESCALADE/ESCALADE ESV
Automatic Climate Controls
2
4
1
3
To Next Page