Setting the Time and Date
For the Single CD Player
This type of radio has a H (clock) button for setting
the time and date. To set the time and date,
do the following:
1. Turn the radio on.
2. Press the
H button and HR, MIN, MM, DD, YYYY
(hour, minute, month, day, and year) displays.
3. Press the pushbutton located under any one of the
labels that you want to change. Every time the
pushbutton is pressed again, the time or the date
if selected, increases by one.
• Another way to increase the time or date,
is to press the right SEEK arrow or the
\FWD (forward) button.
• To decrease the time or date, press the left
SEEK arrow or the
sREV (reverse) button.
You can also turn the
a (tune) knob, located
on the upper right side of the radio faceplate,
to adjust the selected setting.
For a Six-Disc CD Player
This type of radio has a MENU button for setting the
time and date. To set the time and date, do the
following:
1. Turn the radio on.
2. Press the MENU button until the
H label option
is displayed.
3. Press the pushbutton located under the
H label
and the HR, MIN, MM, DD, YYYY (hour, minute,
month, day, and year) displays.
4. Press the pushbutton located under any one of the
labels that you want to change. Every time the
pushbutton is pressed again, the time or the date
if selected, increases by one.
• Another way to increase the time or date,
is to press the right SEEK arrow or the
\FWD button.
• To decrease the time or date, press the left
SEEK arrow or the
sREV button. You
can also turn the
a (tune) knob, located on
the upper right side of the radio faceplate,
to adjust the selected setting.
3-98
To Next Page
Loading...
Need help?
General
