Increasing Speed While Using Cruise
Control
There are two ways to go to a higher speed:
• Use the accelerator pedal to get to the higher
speed. Press the SET– button, then release
the button and the accelerator pedal. The vehicle
now cruises at the higher speed.
• Press the +RES button. Hold it there until the
desired speed is reached, and then release
the button. To increase the vehicle speed in very
small amounts, briefly press the +RES button
and then release it. Each time this is done, the
vehicle accelerates approximately 1.6 km/h (1 mph).
The accelerate feature only works after the cruise
control speed is set by pressing the SET– button.
Reducing Speed While Using Cruise
Control
There are two ways to reduce the vehicle speed while
using cruise control:
• Press the SET– button until the lower speed
desired is reached, then release it.
• To slow down in very small amounts, push the
SET– button briefly. Each time this is done,
the vehicle slows down approximately
1.6 km/h (1 mph).
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase the vehicle speed.
When you take your foot off the pedal, the vehicle
slows down to the previous cruise control speed.
4-14
To Next Page
Loading...
Need help?
General
